2,4-dichloro-5-fluorobenzoyl chloride - Names and Identifiers
2,4-dichloro-5-fluorobenzoyl chloride - Physico-chemical Properties
Molecular Formula | C7H2Cl3FO
|
Molar Mass | 227.45 |
Density | 1.568g/mLat 25°C(lit.) |
Boling Point | 143-144°C35mm Hg(lit.) |
Flash Point | >230°F |
Vapor Presure | 0.0309mmHg at 25°C |
Appearance | clear liquid |
Specific Gravity | 1.568 |
Color | Colorless to Light yellow |
BRN | 4989077 |
Storage Condition | 2-8℃ |
Sensitive | Moisture Sensitive |
Refractive Index | n20/D 1.572(lit.) |
MDL | MFCD00075341 |
2,4-dichloro-5-fluorobenzoyl chloride - Risk and Safety
Hazard Symbols | C - Corrosive
|
Risk Codes | R34 - Causes burns
R36/37 - Irritating to eyes and respiratory system.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S27 - Take off immediately all contaminated clothing.
S28 - After contact with skin, wash immediately with plenty of soap-suds.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
UN IDs | UN 3265 8/PG 2 |
WGK Germany | 1 |
Hazard Note | Corrosive |
Hazard Class | 8 |
Packing Group | II |
2,4-dichloro-5-fluorobenzoyl chloride - Introduction
2. chloride is an organic compound with a chemical formula of C7H3Cl2FOCl. It is a yellow to yellowish brown liquid with a pungent odor at room temperature. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Yellow to tawny liquid
-Melting point: no clear melting point
-Boiling Point: 120-125°C
-Density: 1.563g/cm³
-Solubility: Slightly soluble in water, soluble in most organic solvents
-Reactivity: Acid chloride reaction with alcohol, amine, etc.
Use:
- 2, chloride can be widely used in organic synthesis reactions as reagents, intermediates or raw materials for functional compounds.
-It is commonly used in the manufacture of pesticides, pharmaceuticals, dyes and pesticides.
Preparation Method:
A common method is to synthesize 2, chloride by reacting 2,4-dichloro-5-fluorobenzoic acid with thionyl chloride. Specific reactions are as follows:
C6H3Cl2FO2H SO2Cl2 → C7H3Cl2FOCl HCl SO2
Safety Information:
- 2, chloride has a pungent odor and pungency.
-It is irritating to the skin, eyes and respiratory tract. Care should be taken to avoid contact when handling this compound.
-Wear appropriate protective equipment such as gloves, goggles and protective clothing when operating.
-Avoid reacting with strong oxidants and strong reducing agents to avoid danger.
-storage, should be sealed in a cool, dry place, away from fire and high temperature.
-Do not discharge it into the environment, and dispose of it in accordance with local regulations.
Last Update:2024-04-09 02:00:48